english 
Characteristics of Local Rapid Heating Technology for Oil Tank
2025-03-08
Leave a message
1. Fast heating speed, high heat transfer efficiency, and less prone to scaling.
2. Can heat oil products quantitatively, heating as much as needed.
3. The oil will not experience local high temperature or carbonization, ensuring the quality of the oil and the heat transfer efficiency of the heater.
4. The temperature at the outlet of the oil tank is the highest, ensuring the fluidity of the poured oil.
5. Avoiding repeated heating of the oil in the tank ensures the color of the oil and reduces the cost of oil treatment.
6. Long service life, corrosion resistance, high temperature resistance, high pressure resistance, and anti scaling function greatly improve the overall performance of the heat exchanger.
7. The advanced design of the process structure ensures the smooth flow of oil products and a good "bottom pumping" effect.
8. Automated control can be achieved, and the steam feed rate can be controlled based on the inlet and outlet temperature of the oil and the oil flow rate.
9. Compact structure, easy installation and maintenance, will not affect the safety of the tank due to the installation of the heater. Compared with U-tube heat exchangers, under the same heat transfer area, the external dimensions of vortex heat film heat exchangers are only about half of those of U-tube heat exchangers.
10. Compared to electric heating methods, it is safer, heats more gently, and has less impact on oil quality.
It is reported that this new oil tank heating technology has obtained multiple national patents and has been applied in multiple oil and gas storage and transportation units of PetroChina.
Previous
fuel tank（Fuel storage device）Send Inquiry