english 
Cleaning the interior of a diesel storage tank is crucial for maintaining fuel quality and ensuring the tank's longevity. Here is a step - by - step guide on how to carry out this task effectively.
Safety First
Before starting the cleaning process, ensure all safety precautions are in place. Turn off any associated pumps or valves to prevent fuel flow. The area around the tank should be well - ventilated, and you must wear appropriate personal protective equipment, including gloves, safety glasses, and a respirator if necessary.
Empty the Tank
Use a transfer pump to completely empty the diesel from the storage tank. Transfer the fuel into a clean, approved storage container. Make sure to drain as much fuel as possible, as residual fuel can impede the cleaning process.
Inspect the Tank
Once the tank is empty, use a flashlight to carefully inspect the inside. Look for signs of rust, sediment, or other contaminants. Note any areas that seem particularly dirty or damaged, as these will require extra attention during cleaning.
Initial Flushing
Begin the cleaning by flushing the tank with a small amount of clean diesel. This helps to dislodge loose particles and sediment. Use a hose to direct the diesel over all surfaces of the tank, including the walls, floor, and any internal components. Drain the flushed - out diesel into a separate container for proper disposal or recycling.
Chemical Cleaning
Select a suitable diesel - compatible cleaning agent. Pour the cleaning agent into the tank according to the manufacturer's instructions. Use a brush or a pressure washer attachment, if available, to scrub the tank's interior surfaces. Pay special attention to areas with stubborn deposits, such as rust spots or thick layers of sediment. The cleaning agent will help break down contaminants and make them easier to remove.
Rinsing
After the chemical cleaning, thoroughly rinse the tank with clean water. Repeat the rinsing process several times to ensure all traces of the cleaning agent and loosened contaminants are removed. Drain the rinse water completely from the tank.
Drying
Allow the tank to air - dry naturally. You can also use a clean, dry cloth or compressed air to speed up the drying process. Ensure that there is no moisture left inside the tank before refilling it with diesel, as water can cause fuel contamination and corrosion.