english 
Here are the correct steps and considerations for installing a diesel transfer tank:
- Choose the location: Select a flat, stable, and well - ventilated area. It should be away from sources of ignition, heat, and direct sunlight. Also, ensure it is in an area that allows for easy access for refueling and maintenance.
- Prepare the foundation: If the tank is large or heavy, a proper concrete foundation may be required. The foundation should be level and have enough strength to support the weight of the tank when it is full of diesel.
- Inspect the tank: Before installation, carefully check the diesel transfer tank for any damage, leaks, or defects. Make sure all the fittings, valves, and gauges are in good condition and properly installed.
- Position the tank: Use appropriate lifting equipment to place the tank onto the prepared foundation. Ensure it is placed accurately and leveled. For some tanks, it may be necessary to install anti - vibration pads to reduce noise and vibration.
- Connect the pipes and fittings: Connect the inlet and outlet pipes to the tank according to the manufacturer's instructions. Use high - quality pipes and fittings that are suitable for diesel and ensure all connections are tight to prevent leaks. Install a grounding wire to prevent static electricity buildup.
- Install the fuel gauge and valves: Install the fuel gauge to accurately monitor the fuel level in the tank. The valves should be installed in a convenient location for easy operation and control of the fuel flow.
-
Test the installation: After all connections are made, conduct a leak test. Fill the tank with a small amount of diesel and check for any leaks at the connections and the tank body. If no leaks are found, the installation is considered successful. Finally, make sure to label the tank clearly with warning signs and information about the fuel it contains.
